The nation's largest, vendor-independent valued-added reseller of data center infrastructure solutions, 42U (http://www.42u.com), announced today that is has added Rittal to their GSA schedule.Including enclosures, high-density cooling solutions and power distribution units, 42U's government customers, with this addition, can now have access to the industry's leading modular, scalable and comprehensive IT infrastructure solutions. The following are included in the agreement:
Rittal Liquid Cooling Package (LCP) is a high density cooling solution, developed to remove high levels of wasted heat from server enclosures, utilizes air/water heat exchangers to provide uniform, effective and affordable cooling for servers and similar IT equipment. Providing cooled air uniformly throughout the complete height of the enclosure, the special horizontal airflow of the Rittal LCP represents an adaptation of this widespread cooling principle.
The LCP Standard, designed to be installed next to an 80" (2000 mm) high by 40"/48" (1000/1200 mm) deep TS8 server cabinet, can accommodate up to three air/water exchanger modules that can be hot swapped if needed. The LCP Standard, when fully loaded with three air/water exchanger modules, can provide up to 68,243 BTU (20KW) of useful cooling with a maximum air volume of 1766 cfm (3000 m3/hr). Don't have an immediate need for that much heat removal? Start with one exchanger module then add more as needed.
To increase the useful cooling capacity to 95,540 BTU (28 kW), the LCP Plus, using the same footprint and basic design as the Standard, includes six fan modules that work in concert with the included heat exchanger. The LCP Plus is designed for cabinets 80" (2000 mm) high by 48" (1200 mm) deep and has a maximum air volume of 2825 cfm (4800 m3/hr). The LCP Plus (and LCP Standard) can be bayed to a single cabinet or between two enclosures. For applications where extreme heat loads are present, it is also possible to put a pair of LCPs on either side of especially hot cabinets.
The LCP Extend, ideal for retrofitting, is installed on the rear door of problem racks. The LCP Extend can be ordered for use on cabinets from other manufacturers. The unit comes mounted into the proper replacement rear door which allows you to simply swap it out with the existing rear door, if you are already using Rittal cabinets.
From 5,000 to 20,000 Watts, Metered PDU products provide reliable power distribution for all the devices in your equipment cabinet. Metered units are available in 20 or 30 amps, 120 Volts or 208/240 Volts single-phase, and 208 Volts three-phase. The installation engineer is allowed by the local input current monitoring to verify the combined load on the circuit or phase.
Reliable power distribution combined with remote power and environmental monitoring is provided by the Smart PDU products. Use the network interface to view power, temperature and humidity levels via a Web browser, or receive SNMP-based alarms when conditions exceed defined thresholds.
Including reboot commands for connected servers and network equipment, switched PDU products are Flagship PDU's with remote monitoring and management. Complete lights-out management of a data center and remote branch office is provided by The Switched PDU products. Switched PDU's combine remote configuration and management with power distribution and power and environmental monitoring.
A revolutionary system designed specifically for demanding industrial applications, Rittal TS8 Modular Industrial Enclosure, Features a 16- fold tubular frame and multi-level mounting, the TS8 boasts unsurpassed strength and flexibility. The robust tubular frame can hold weight loads up to 1,500 lbs on the mounting panel. The 25 mm hole pattern allows components and accessories to be mounted in three directions, by height, width and depth, which provides maximum space utilization (up to 30% more available space than traditional NEMA style enclosures of equal dimension).
