signal Software

Virtins Pocket Signal Generator 1.0
It consists of signal generator and an off-line oscilloscope. It provides the following types of waveform for output: (1) Sine (2) Square (3) Triangle (4) Saw Tooth (5) White Noise (6) Pink Noise (7) Multi-tones (8) Arbitrary via user-configurable waveform library, at either a fixed frequency, or a frequency that sweeps linearly or logarithmically within specified frequency range and time duration.

RAL / Realtime Analyzer Light 2.0.0.2
Quality sound measurement software equivalent to at least US$10,000 hardware. The software license of RAL costs just US$24, but RAL is more functional than the usual FFT analyzer. General realtime measurement function is entirely included.It has the signal generator, Peak level meter, Power spectrum, 1/3 octave analysis, 3D graph (TEF), and Oscilloscope. It can be used broadly from a home audio, and a car audio to a concert hall.

Sound Generator 5.05
Eight-channel audio frequency sinusoidal & noise signal generator is intended for adjusting and measuring parameters of audio equipment. Independent channels frequency and amplitude controls. A step of frequency setting is 0.00001 %; level - 0.001 dB; phase - 0.001 degree. The minimum coefficient of nonlinear and intermodulation distortion, precision, stability and range of frequency are limited only to quality of the used sound card.

Virtins Sound Card MultiInstrument 3.0
Multi-Instrument is a powerful sound card based multi-function virtual instrument software. It contains Oscilloscope, Digital Filter, Spectrum Analyzer, Correlation Analyzer, Dynamic Signal Analyzer, Octave Analyzer, Distortion Analyzer, Multimeter, SPL Meter, Frequency Counter, Counter, RPM Meter, Signal Generator (Function/Arbitrary/Noise/Sweep/Burst), Waterfall Plot, Spectrogram, Data Logger, LCR Meter, User Configurable Device Test Plan.

Virtins Pocket Instrument 1.0
VIRTINS Pocket Instrument is a powerful Pocket PC based virtual instrument software. It consists of a real time oscilloscope, a real time spectrum analyzer and a signal generator, and can run them simultaneously. It supports sophisticated triggering method including pre-trigger and post-trigger which are generally missing from other sound card based instruments.

DSSF3 Light 5.1.x.x
DSSF3 Light is a highly advanced sound analyzer greatly exceeding the usual FFT analyzer's performance. It is the best choice for learning sound measurement and for education. DSSF3 Light is equipped with the latest functions of the realtime analyzer, such as the signal generator, the FFT analyzer, the sound level meter, the oscilloscope, and the sound recorder.

DSSF3 Basic 5.1.x.x
The free version of the advanced sound measurement software DSSF3 is now available. It consists of the signal generator, sound recorder and player, and the peak level meter. DSSF3 Basic works with the latest soundboards. Two or more soundboard can be selected easily. The sampling rate can be set up to the maximum value allowed by the hardware.

Virtins Sound Card Signal Generator 3.0
Signal generator and off-line oscilloscope, providing the following types of waveforms: (1) Sine (2) Square (3) Triangle (4) Saw Tooth (5) White Noise (6) Pink Noise (7) Multi-tones (8) Arbitrary (9) MLS (10) Musical Scale (11) DMTF, at either a fixed frequency, or a frequency that sweeps linearly or logarithmically within specified frequency range and time duration. Amplitude sweep is also supported. It is a part of VIRTINS Multi-Instrument.

Strobe Sync Pulse Generator 1.1
This program generates signals to test loudspeakers with the help of a synchronised LED stroboscope. The only external hardware needed is a two channel amplifier and an LED flashlight. Traditionally these tests are done with dedicated hardware devices costing several thousand dollars or Euros. Here the computer sound card supplies the two signals to the two channel amplifier.

Audio Multi-Channel Generator 5.05
Eight-channel audio frequency sinusoidal & noise signal generator is intended for adjusting and measuring parameters of audio equipment. Independent channels frequency and amplitude controls. A step of frequency setting is 0.00001 %; level - 0.001 dB; phase - 0.001 degree. The minimum coefficient of nonlinear and intermodulation distortion, precision, stability and range of frequency are limited only to quality of the used sound card.